Part Number Hot Search : 
KXXX0GRP ANT23 20KW232 NTE1459 LF112EDI ISL8009 K4401 WM872201
Product Description
Full Text Search
 

To Download STA2062 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 STA2062
CartesioTM Infotainment application processor with embedded GPS
Data Brief
Features


High performance ARM926 MCU (up to 333MHz) MCU memory organization - Cache: 16KByte instruction, 16KByte data - 8KByte instruction TCM (tightly coupled memory) - 8KByte data TCM - 32KByte embedded ROM for boot - Two banks of 64KByte embedded SRAM - 512Byte embedded SRAM for back-up - 4GByte total linear address space - Memory extension through: Flexible static memory controller-FSMC (NOR/NAND Flash, CF/CF+, ROM, SRAM support) Mobile DDR/SDRAM controller: 16bit data @166MHz, 2 Chip Select, 512Kbit each Interrupt - 64-channel interrupt controller (VIC) - 16-vectorized interrupts with 16 programmable priority Level DMA - Two 8-channel double port system DMA controllers - 32 DMA request for each controller - Two external DMA requests are supported 32 channel high performance GPS correlation embedded subsystem Eight 32-bit free running timers/counters Four 16-bit extended function timer (EFT) with input capture/output compare and PWM Real time clock (RTC) Pulse width light modulator (PWL) 32-bit watchdog timer Four autobaud UART with 64X8 transmit and 64x12 receive FIFO with DMA and hardware flow control One IrDA(SIR/MIR/FIR) interface Three I2C multi-master/slave interfaces Two synchronous serial port (SSP) with 32x32 separate transmit and receive FIFO with Motorola-SPI, National-MicroWire and TexasSSI support modes
LFBGA361 (16x16x1.4mm)

Four multichannel serial ports (MSP) with 32x8 separate transmit and receive FIFO Color LCD controller for STN,TFT or HR-TFT panels USB 2.0 OTG high speed dual role controller (ULPI interface) USB full speed dual role controller with integrated 1.1 physical layer transceiver Two secure-digital multimedia memory card Interface (SD/SDIO/MMC) up to 8 bit data SPDIF input interface C3 hardware Reed-Solomon decoder Hardware sample rate converter (SaRaC) Two controller area network (CAN) Four 32-bit GPIO ports JTAG based in-circuit emulator (ICE) with embedded medium trace module Typical working condition: Vdd: 1.2 10%V, VIO: 1.8V Overdrive: Vdd: 1.4 5%V, VIO: 1.8 10%V, 2.5 10%V Bus frequency: 166 MHz (overdrive) Bus/DDR frequency: 166 MHz HCMOS 0.90m process Package: - LFBGA16x16x1.4mm (19x19balls) - 0.8mm ball pitch, (0.4mm ball) - Full array Ambient temperature range: -40 / +85C Device summary
Package LFBGA361 Packing Tray
Table 1.
Order code STA2062
October 2007
Rev 2
1/5
www.st.com 5
For further information contact your local STMicroelectronics sales office.
1
MCU APB
MSPSCKx MSPRXDx
SUPPLY
VDD12 VDD33 VDDPLL
MXTAL
2/5
DACK0 DACK1
ETM TEST PORT (JTAG)
Description
Figure 1.
DREQ0 DREQ1
DMA 1 DMA 0 M1 S M0 LCDC Interface ULPI Interface
JTAG 16 KB I / 16KB DCACHE
USB PHY
M0 S M1
ADDRESS
CTRL
FSMC LCD CTRL VIC
(8K x 32)
8K ITCM / 8K DTCM ARM926EJ
S USB OTG HS USB FS S S eROM S
Description
PORT FSMC
DATA
IM
DM
S
S
M
ADDRESS
ARM AHB Instruction ARM AHB Data DMA 0 M0 S
(32K x 32)
CTRL
S LCD AHB DMA 0/1 M1 DMA1 M0 BACKUP S AHB / APB Audio & Automotive Bridge S RAM
(128 x 32)
eSRAM
block diagram
PORT SDMC
DATA
SDMC
PLL1
S AHB / APB Core Peripheral Bridge
APB I/F
S PLL2 SRC
MXTAL
AHB / APB DMA Bridge
APB I/F
SXTAL
PWL
APB I/F
PWLOUT
GPIO(0,3)
BACKUP
APB I/F
FIRRXD
IrDA
CANTxx
RTT
APB I/F
CANRxx
APB I/F
FIRTXD
(FIR/MIR/SIR)
APB I/F
CAN(0,1)
RTC
ECLK0-3
APB I/F
I2CSDAx
APB I/F
I2CSCLx APB I/F
I2C(0,1,2) PMU
OCMPxA/OCMPxB
APB I/F
ICAPxA/ICAPxB
EFT(0,3)
MCCMD MCCMDDIR MCCLK SPDIFIN
UTXDx URTSxn UDTR0n
SPDIF
APB I/F
MCFBCLK
UART(0,3)
WDT
APB I/F
APB I/F
APB I/F
SD/SDIO/MMC(0,1)
C3
MCDIR0 MCDIR2 MCDIR31 MCDIR74 APB I/F
URXD0 UCTSxn UDCD0n UDSR0n URI0n
MTU(0,1)
APB I/F
MCDAT[7:0]
CHITF
APB I/F
APB I/F
SSPTXDx
UUID Support APB
BD
SSPTXDx
APB I/F
SSP(0,1)
APB I/F
SSPCLKx SSPFRMx
SaRaC
MSPTXDx CORE IOs PLL
MSPTFSx MSPTCKx MSPRCKx
APB I/F
MSP(0,1,2,3)
The STA2062 is an highly integrated SOC application processor combining host capability with embedded GPS.
Figure 1: block diagram gives an overview of the complete processor, showing how the ARM926 microcontroller and its peripherals are interfaced.
STA2062 targets in vehicle and mobile navigation (PND), telematics, advance audio and connectivity systems.
STA2062
MSPRFSx
STA2062
Package information
2
Package information
In order to meet environmental requirements, ST offers this device in ECOPACK(R) packages. This package has a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com. Figure 2. LFBGA361 (16x16x1.4mm) mechanical data & package dimensions
mm DIM. MIN. A A1 A2 A3 A4 b D D1 E E1 e F ddd eee fff 0.350 0.400 0.210 0.985 0.200 0.800 TYP. MAX. 1.400 0.0082 0.0387 0.0079 0.0315 MIN. TYP. MAX. 0.0551 inch
OUTLINE AND MECHANICAL DATA
0.450 0.0138 0.0157 0.0177
15.850 16.000 16.150 0.6240 0.6299 0.6358 14.400 0.5669
15.850 16.000 16.150 0.6240 0.6299 0.6358 14.400 0.800 0.800 0.100 0.150 0.080 0.5669 0.0315 0.0315 0.0039 0.0059 0.0031
Body: 16 x 16 x 1.4mm
LFBGA361 Low profile Fine Pitch Ball Grid Array
8033008 B
3/5
Revision history
STA2062
3
Revision history
Table 2.
Date 3-Oct-2007 12-Oct-2007
Document revision history
Revision 1 2 Initial release. Minor changes. Changes
4/5
STA2062
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
(c) 2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
5/5


▲Up To Search▲   

 
Price & Availability of STA2062

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X